Contact Us
TEL: +86-571-88322170
Fax: +86-571-88865359
E-mail: alvin@xianhengintl.com
Add: Building 2nd, No. 27th Xingye Street, Xiacheng District District, Hangzhou, Zhejiang, China
Battery Steel Cable Cutter

Battery Steel Cable Cutter

50mm Battery powered cable cutter ECT-50 Features: Two stage hydraulics, automatic pressure-relief at Max. pressure of Battery hydraulic cutting tool Fast cutting, light weight, easier for cutting. Flip top style, rotates 360° Built-in microchip controller, more cutting times with one-time...

50mm Battery Steel Cable Cutter ECT-50

All tools can be controlled by one key-press the trigger to start working, half loosing the trigger means stop forcing pressure, loosing fully means piston return to the original position.

LCD Data Display-The Total Crimping Times, Electricity Power, Errors Info can be checked by the Display, also we can special making for customer to show the pressure if necessary.

Air Cooling Heat dissipation system to extend using.

Heads Rotates 350 degree in order to gain better access to tight corners or other difficult working areas.

Li-ion batteries do neither have a memory effect nor self-discharge. Even after long periods of non operation the tool is always ready to operate. In addition we see a lower power weight ratio with 50% more capacity and shorter charging cycles copare to NiMH batteries.

The unit is equipped with a double piston pump which is characterised by a rapid approach of the dies forwards the connector and a slow crimping motion.

 Features:

  • Two stage hydraulics,  automatic pressure-relief at Max. pressure of Battery hydraulic cutting tool

  • Fast cutting, light weight,  easier for cutting.

  • Flip top style, rotates  360°

  • Built-in microchip controller, more cutting times  with one-time charge, protect the device body.

  • High power capacity, high performance18V Li-ion  battery, with quick charger for the Battery cutter cable

  • With LED light for dark environment.

  • Charge once, 70 cutting times.

  • A temperature sensor makes the tool stop working automatically when the temperature is over 60℃ under long time working, the fault signal sounds, it means the tool can't continue to work until the temperature reduces to normal.

Output Force

6T

Rated Pressure

700bar

Cutting Capacity

Max. cable size: Ø50mm Cu/Al/ACSR

Charging time1 hour
Cutting cycle6-18s

Weight

4.7kg

Packing

Steel Case/Plastic Case



image001(001).jpg


image003(001).jpg

JPG2.0.jpg

Hot Tags: battery steel cable cutter, China, suppliers, manufacturers, factory, buy discount, price, quotation
Inquiry